ROM2Box v3.7 is a smartphone repairing software created by ROMProvider, by using this tool You can Repair many smartphones for free without any authentication. The tool Support QCOM, Mediatek & spreadtrum/Unisoc smartphones Including many Download Disabled Phones from Oppo, Vivo, Xiaomi, and Realme. Download the latest version of Rom2Box from the below links provided by A2GSMTOOLS.COM.

Tool credit goes to Romprovider

You Might Like: GSMADJAA Universal Activator AIO V1.6 BETA (CHECKRA1N Activator)

What’s new

added fastboot tab

fastboot functions

• Read GPT
• Erase partitions
• Flash partitions
• Read device info
• Unlock bootloader
• Erase FRP (Factory Reset Protection)
• Factory reset
• Reboot into Emergency Download Mode (EDL)
• Reboot into Fastboot mode
• Reboot system

Download Rom2Box 2024

Download Links:

• ROM2BOX v3.7 (only update file): Download
• ROM2box V3.5 update file Replace in 3.2 (must require): Download
• ROM2box V3.2 full free win 64bit: Mirror
• turn off the internet connection
• set display to 100%, you can Increase font size Instead of scaling
• Rom2Box v3.4 update file in v3.2: Download
• ROM2box V3.3 update file Replace in 3.2: Download
• ROM2box V3.1 full free win 64bit:Download/ Mirror
• Download the user guide Docx/ rawprogram0 editing guide

How to Replace Update fle only:

• First, you can download the ROM2Box v3.2 because it comes with a full setup file
• Next extract the all files of ROM2Box v3.2 in the c: drive (in my case my path is = “C:\ROM2box_V3.2“)
• Next download the latest version of ROM2Box v3.7 and extract in the same path their you can extract all files of ROM2Box 3.2 and replace them with new files
• Now run the tool as admin by clicking on the “ROM2Box.exe“
• Once you can open the tool now connect your device to a computer choose the desired option and perform all tasks free of cost
• Enjoy!

Installation Guide New Update:

• disable defender
• Portable, Just extract
• Run Install.bat to replace old files in the temp
• updates- Extract the update file in the Main directory and overwrite all

USB Driver:

• Download All USB Drivers: Download

What’s New

Rom2Box Features

To Read MTK Firmware, there are two options: using the flash.bin or the Partition option. Follow the steps below:

1. Connect your phone in VCOM/BROM mode.
2. Go to Mediatek/Firmware reader and click on your desired option. Note that flash.bin takes a long time to read the user data partition, whereas the Partition option does not read user data and takes only 15 minutes.
3. For UFS devices, use the “send xml” option included in the New section, as the option displayed in the older section may not work on some devices. If you don’t have an XML, read the gpt and parse it. Remember to read qcn from qcom/other before doing anything.
4. The user data partition will be skipped as it takes a long time. However, you can manually read partitions with numbers like keymaster1. Go to ROM2box/qcom and edit the part table file to add all partitions that contain a number from the parttablex file. Once done, run read.exe for emmc and readu.exe for UFS. Make sure you have read the full firmware via ROM2box before using this process.

For MI Account bypass:

1. Go to Xiaomi and select your device.
2. Connect your phone to the computer (short test point) and wait for device detection.
3. Once the COM port is detected, click “bypass MI account/persist.”

For QCOM FRP bypass:

1. Go to QCOM and select Firehose.
2. Connect your phone to the computer (short test point) and wait for device detection.
3. Once the COM port is detected, click “bypass FRP.”

For QCOM Pattern bypass:

1. Go to QCOM and select Firehose.
2. Connect your phone to the computer (short test point) and wait for device detection.
3. Once the COM port is detected, click “Reset/user lock bypass.”

For Vivo Pattern bypass:

1. Go to Vivo and select your device.
2. Connect your phone to the computer (short test point) and wait for device detection.
3. Once the COM port is detected, click “Reset/user lock bypass.”

For Oppo Pattern bypass:

1. Go to Oppo and select your device.
2. Connect your phone to the computer (short test point) and wait for device detection.
3. Once the COM port is detected, click “Reset/user lock bypass.”

For Huawei ID bypass:

1. Go to Huawei and select your device.
2. Connect your phone to the computer (short test point) and wait for device detection.
3. Once the COM port is detected, click “ID bypass.” Note that this is experimental and may not work on many models.

For unsupported QCOM devices testing with No Auth Firehose:

1. Go to QCOM/Experiment tab and select a suitable programmer (more than 450+ patched firehose added).
2. Connect your phone to the computer (short test point) and wait for device detection.
3. Once the COM port is detected, run the function you want.

For MTK Disable Auth:

1. Go to Mediatek/main tab and mark “disable auth.”
2. Click the “start” button.

For Mediatek unlock bootloader:

1. Go to Mediatek/service/bootloader unlock.

For QCOM Disable Auth:

All included devices are pre-patched.

For Flash QCOM Firmware:

1. Go to qcom/firmware flasher.
2. Load the XML and programmer files from the firmware folder.
3. Connect your phone in edl mode.
4. Once the device is detected, click the “start” button.

FREQUENTLY ASKED QUESTIONS