D Light M100 FRP & DA File helps you bypass the FRP Google Account verification lock quickly by using the SP Flash Tool. Here, you’ll find direct download links for the latest FRP file with the Flash Tool along with a simple step-by-step guide to bypass FRP Lock.

FRP, or Factory Reset Protection, is a security feature for Android devices developed by Google. After a factory reset, FRP is enabled by the device. It binds the current device to the user’s Google Account. This feature helps prevent unauthorized access to personal data in case of theft or loss of your device. It supports Android 5.1 or higher Android versions.

The D Light M100 FRP File helps you remove the Factory Reset Protection (Google Account) verification lock in just one click by using an SP Flash Tool. Here, we have shared links for downloading the FRP File along with the Latest Official USB Drivers, Flash Tool, and a guide on How to use it.

The FRP Bypass APK is used to bypass FRP Lock on any Android Smartphone running Android Lollipop 5.0, Marshmallow 6.0, Nougat 7.0, Oreo 8.0, Pie 9.0, Android 10 Q, Android 11, Android 12, Android 13. It is also compatible with the latest Android 14 version. You can also use APK to remove the FRP lock from any Android Device.

Download D Light M100 FRP Solution File

• Dlight M100 FRP File.rar: Download
• Dlight M100 DA File: Download
• SP Flash Tool: Download
• Mediatek USB Drivers: Download

How to Bypass FRP Lock on

• Download the FRP file and flash tool from the above links.
• Extract the zip file on the computer. (see below image)

• Install the SPD USB Driver (if you haven’t done so already).
• Open the Extracted folder & Run flash_tool.exe. (see below image)

• Choose the Download-Agent Tab and select the D Light M100 DA FILE.bin file. (if Required)
• Now Click on the Choose Scatter-loading File Tab. (see below image)

• Locate and select the MTK_Android_scatter.txt file and Tap Open. (see below image)

• Now Uncheck the Preloader Partition.
• Go to Format Tab. (see below image)

• Select Manual Format Flash. (see below image)

• Copy and Paste the below FRP Address into the SP flash tool (carefully check the format address. The wrong address may brick your phone) (see below image)

FRP Erase Address  
-------------------------------------------
linear_start_addr: 0x18000000 
partition_size: 0x100000

• Now Click on the START button.
• Power Off your Device and connect to the PC by USB cable.
• Open Device Manager => Check the COMPORT Number.
• Your phone will make a MediaTek USB Port. (see below image)

• Sp Flash Tool will detect and start flashing.
• Wait for the process to complete and a green message shows Success. (see below image)

• Done, FRP Removed Successfully.
• Disconnect the USB Cable and Power ON your Device.