BROM error status_brom_cmd_send_da_fail (0xC0060003) is an error that comes in the latest SP Flash tool, it occurred when you try to flash a Boot protected device via the flash tool. if you want to fix this issue then this article is for you where we share a complete guide to fix the “BROM error status_brom_cmd_send_da_fail (0xC0060003)” error.
Must Read: How to Fix Startup Failed Motorola
Possible Reason:
- wrong firmware
- wrong DA File
- Wrong Auth File
- SLA Enable device!
How to Solve Error
- check if the firmware is correct or not
- Use any MTK Auth Disable Tool: Rom2Box MTK Meta Utility
- Download Custom DA & Auth File for your device model
- Always use the Latest SP Flash tool
Read Also: OnePlus 10 Pro Fix Dead Boot & Blank Screen After Flash
Flashing Steps:
- Download Correct Firmware
- Disable Auth ( Power off Then Hold Vol+-)
- Open SP Flash Tool
- under download, agent, Select Custom DA File (If Need)
- under Authentication, select Auth File (If Need)
- Now Load Scatter From the Firmware folder and Click ‘Download Only’
- Done
status_brom_cmd_send_da_fail issue is Now fixed
Read Also: