[Latest]Xiaomi Flashing Interface Qualcomm V1.0.4 by Zesuga Project 2022

Exclusive Featured Functions

• – MD5 Files Checksum
• – Fastboot Flash
• – Xiaomi EDL Flash Without Auth
• – EDL Flash
• – EDL Flash [Single Raw]
• – EDL Flash [Multi Raws]
• – Muti Devices Flash

Xiaomi Flashing Interface V1.0 EDL Without Auth Flash Tested Model Device

• – Redmi 7A
• – Redmi 8
• – Redmi 8A
• – Redmi Note 8

What’s New

Xiaomi Flashing Interface v1.0

Feature:

- MD5 Files Checksum
- Fastboot Flash
- Xiaomi EDL Flash Without Auth
- EDL Flash
- EDL Flash [Single Raw]
- EDL Flash [Multi Raws]
- Muti Devices Flash

EDL Without Auth Flash Tested:
- Redmi 7A
- Redmi 8
- Redmi 8A
- Redmi Note 8

EDL Without Auth Supported Devices:
- Pocophone F1 (Beryllium)
- Pocophone M3 (Citrus)
- Blackshark 3 Pro 
- Blackshark 3
- Redmi Note 9 4G / Redmi 9T (lime)
- Redmi Note 8 (ginkgo)
- Redmi Note 8T (willow)
- Redmi Note 5 Pro (whyred)
- Redmi Note 6 Pro (tulip)
- Redmi Note 7 Pro (violet)
- Redmi Note 7 (lavendar)
- Mi 8 (dipper)
- Mi 8 Lite (platina)
- Mi 8 SE(srius)
- Mi 8 EE(equuleus)
- Mi 8 Pro/UD(ursa)
- Mi 9 SE (grus)
- Mi CC9 (pyxis)
- Mi CC9E (laurus)
- Mi 6X (wayne)
- Mi Max 3 (nitrogen)
- Mi 5X (tiffany)
- Mi A2 Lite (daisy)
- Redmi 6 Pro (sakura)
- Redmi 7A (pine)
- Redmi 8 (olive)
- Redmi 8A (olivelite)
- Redmi 8 Pro/DUAL (olivewood)
- Redmi S2 (ysl)

1. First, you need to download the zip file from the below link
2. Next, you can unzip all files at c: drive (important)
3. Ensure you have disabled the antivirus before running the installation
4. Next, open the folder and install the setup file with some basic instruction
5. Run the “Xiaomi Flashing Interface.exe”
6. Next, you can install all drivers if you already installed skip this step
7. Next, boot the device into EDL or Fastboot Load the firmware file and click on the “FLASH” button
8. Connect the phone and try to do any function
9. Enjoy !!!