MagicCFG Windows V1.2 Latest Version Download [Purple Mode for iPhone]

MagicCFG Windows has released a new update, version 1.2, of its free Windows software program. MagicCFG tool allows you to enter the diagnostic mode for Read or write sysconfig, repairing NAND data, and modify serial from iPhones and iPads. Here, you’ll find direct download links for the latest update and previous versions of the Tool, along with a simple step-by-step guide for installation.

MagicCFG Windows

MagicCFG Windows Tool is a free software for Windows developd by by j4nf4b3l & iAldaz Activator that allows users to perform various tasks on iOS Devices. MagicCFG Windows is predominantly written in C# and interacts with the syscfg partition of iPhones and iPads. supports checkm8-based A9 to A11 powered iDevices to enter Diag Mode, reads & repairs SysCFG, fixes drivers, backup SysCFG, unlock iCloud, read ECID, and factory reset, etc easily. If you’re looking for a tool to fix your phone without hassle, simply follow these easy steps and download the MagicCFG on your computer and improve your iphone’s performance quickly.

The MagicCFG Tool is a software that is used to work on any Android Smartphone running Android Lollipop 5.0, Marshmallow 6.0, Nougat 7.0, Oreo 8.0, Pie 9.0, Android 10 Q, Android 11, Android 12, Android 13. It is also compatible with the latest Android 14 version. The software app is Compatible with Microsoft Windows 7, 8, 10, and 11 OS with both 32-bit and 64-bit arc.

ThisMagicCFG is user-friendly and using the tool functions is easy and simple, Just Install setup and open the software on your computer, log in with required credentials if required, choose the required function Read or write then connect your phone via a good USB cable in boot mode (Recovery or DFU Mode. The tool will detect your phone unlocked within a few minutes.

Features & Functions

  • Cost-effective: Unlike conventional NAND programmers from the Far East, MagicCFG Windows 2023 V1.0 requires no additional accessories except for a DCSD cable or adapter. This makes it a more affordable and faster alternative for reading, writing, and restoring configuration data.
  • Compatibility: MagicCFG Windows 2023 V1.0 is compatible with a wide range of iDevices, including A10 – A11 processors. For A9 and below processors, a DCSD cable is required.
  • User-friendly Interface: The utility provides an intuitive and user-friendly interface, ensuring that users of all technical levels can navigate through the options effortlessly.
  • Time-saving: With MagicCFG Windows 2023 V1.0, you can perform diagnostic tasks efficiently, saving both time and effort. Its streamlined functionality enables quick access to essential configuration data, enhancing your productivity.
  • Unlocking Potential: By leveraging the power of purple mode, MagicCFG Windows 2023 V1.0 unlocks hidden features and customization options, empowering you to maximize the potential of your iDevice.

Safety Precautions

  • Understanding: Familiarize yourself with the utility and its functionalities before making any modifications. 
  • Backup: Before making any changes to your iDevice’s configuration data, create a backup of the existing settings.
  • Research: Stay informed and educated about the syscfg partition and its implications. It’s essential to have a clear understanding of the configurations you are modifying to prevent unintended consequences.
  • User Responsibility: MagicCFG Windows 2023 V1.0 provides powerful capabilities, but the responsibility lies with the user. Exercise caution and use the utility responsibly to avoid any adverse effects on your iDevice.

Updates & Changelog

New functions added to MagicCFG for Windows OS version 1.2

  • unbinding WiFi
  • repairing CPID boot diagnostic issue (0x8003)
  • stable device reading in purple mode
  • fix minor bugs and issues

Supported devices

MagicCFG supports all Apple A9, A10 & A11 chipset, Also here we have listed all the supported iPhones and iPads (2013 – 2019) (Cellular models).

Phone ModelChipset
iPhone 6S, iPhone 6S Plus, iPhone SE,iPad (2017) 5thA9
iPad Pro (12.9) 1st gen, iPad Pro (9.7)A9X
iPhone 7, 7 Plus, iPad (2018, 6th gen), iPad (2019, 7th gen)A10
iPad Pro 10.5 (2017), iPad Pro 12.9 2nd Gen (2017)A10X
iPhone 8, iPhone 8 Plus, and iPhone XA11

Download MagicCFG Windows – Latest version

The MagicCFG Windows allows you to modify system configiration from iPhone or iPad Devices. We recommend always downloading the Latest version for better stability and performance.

Password (if ask):

VersionDownload Link

How to Install and Use

  1. Download the required version from the above links
  2. After downloading extract the zip file using Winrar or 7Zip
  3. Open the Extracted folder and double-click the Magiccfg setup
  4. Now Accept the Terms & Conditions and proceed
  5. Choose the Installation folder (c: drive Recommended)
  6. Follow the on-screen instructions and complete the installation
  7. Now Go to Desktop and Open the Magiccfg.exe
  8. Login with ID and Password (if Required)
  9. Choose your Mobile Brand and Model
  10. Power off the Phone (Make sure the Battery is at least 30% charged)
  11. Connect the phone to boot mode
  12. Choose Function as required
  13. Wait for the Unlock Process to complete
  14. Once the flashing process is completed, Disconnect and Power on Your Device.
  15. Done, You have Successfully unlocked your device.

How to change the iPhone serial number (S/N) on Windows:

  1. Download MagicCFG for Windows from the above links and extract the ZIP file to your Desktop.
  2. Put your iPhone or iPad into DFU Mode by following the specific key combinations for your device model.
  3. Connect your device to your Windows computer using a USB cable.
  4. Open the extracted MagicCFG folder and launch MagicCFGWin.exe.
  5. Click on “Enter Diag Mode” in the MagicCFG application to activate diagnostic mode on your device.
  6. Back up all important data on your device to prevent data loss during the serial number-changing process.
  7. Enter the new serial number in the provided field within the MagicCFGWin.exe application.
  8. Click on “Write” or a similar button to confirm and apply the changes.

Note: A DCSD cable may be required for devices other than those with A10 to A11 CPUs. Ensure you have the necessary cables and follow all instructions carefully.


MagicCFG Windows offers a hassle-free solution for managing Apple devices, with features like unbind wifi, and serial change. Its compatibility with all major Android versions and Windows OS makes it a valuable tool for device maintenance. Plus, it’s free to use, making it an attractive option for users seeking effective phone management solutions.

Readme Once:

[*] Firmware: If you wish, you can download the official firmware Stock Rom, from A2GSM.COM or GSMMAFIAS.COM page.

[*] Flash Tool: If you wish, you can download the other Free Tools for flashing from A2GSM.COM or A2GSMTOOLS.COM page.

[*] USB Drivers: If you wish, you can download the latest version of USB Drivers of all Major Brands, from USB Drivers (Android+iOS) page.

[*]Make a backup: Please Make sure to take a backup of your data before doing any operation on your device, as flashing will wipe user data from the device.

[*]Use at your own risk: Using the Third Party Tools may void your device’s warranty. Proceed with caution and understand the risks involved.

[*]Links: We don’t host any files on our Server, We’re sharing Downloading Links from third-party file-sharing webservers.

[*] Credits: Thanks to the Respected Developer of these tools for sharing it online for Free to all users.

Frequently Asked Questions (FAQs)

  1. Is the MagicCFG Windows Free to use?

    Yes, it is completely free to download and use.

  2. What purpose of using MagicCFG Windows?

    You can use it to modify critical system settings in diagnostic mode on iDevices easily.

  3. Is MagicCFG Windows Safe to Use?

    Yes, it is completely safe for your device and Also for computers and laptops.

  4. Is it Compatible with All Windows versions?

    Yes, You can use it on Microsoft Windows 7, Windows 8, Windows 10, Windows 11, or later (32-bit and 64-bit).

  5. Is there any alternative Flash Tool?

    Yes, there is an alternative tool called Android Utility (MTK META Utility). Android Utility (MTK META Utility) is another flash tool that was developed for flashing firmware, custom ROMs, and recovery images onto Android smartphones and tablets.

  6. How can I Find Firmware Stock ROM for Android?

    You can download it from the Official Manufacturer’s website or you can check Trusted Alternate Websites like A2GSM, BBKROM, A2GSMTOOLS, Firmware File, and GSMMafia.

  7. Where can I download the USB Drivers?

    You can download the official USB drivers from here, or Alternatively, you can download from websites like A2GSM, or XDA Developers forum.