OnePlus Ace Pro PGP110 is a high-end smartphone powered by Qualcomm 8 Gen1 Processor. In the last few days, I have seen that many people bricked their OnePlus Ace Pro PGP110 by flashing the firmware via fastboot, if you are one of those then you can try the below fixes to fix it.
Important Note:
- avoid downgrading from android 13 to 12
- don’t use the python fastboot ofp flash tool on this device
- don’t switch regions, if you don’t know how to do test point
- don’t flash any ROM from fastboot, if you don’t know how to do test point
How to Fix:
- if soft brick after the android 13 upgrades, try to flash the following partition
Disclaimer: Flash at your own risk, because you may face hard brick (stuck at edl/black screen)
fastboot –set-active=a fastboot erase userdata fastboot flash recovery recovery.img fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash super super.img fastboot flash vbmeta vbmeta.img fastboot reboot bootloader fastboot –set-active=b fastboot erase userdata fastboot flash recovery recovery.img fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash super super.img fastboot flash vbmeta vbmeta.img fastboot –set-active=a fastboot reboot
or you can use a single code for both A and B slots like this
fastboot flash partition-name_ab 'filename'
Hard Brick / Black Screen Solution:
- you have to contact us for MSM Auth, once you have access to the MSM download tool you can reflash it via EDL Mod.
Requirements:
proof:
