If you are experiencing FRP issues with your Gionee X1 or X1S smartphone, don’t worry, as we have a step-by-step guide to help you remove or reset FRP.
The Gionee X1 smartphone runs on Android 7.0 Nougat OS and is powered by a MediaTek MT6737 processor. The device has 2GB of RAM and 16GB of ROM, which is expandable up to 128GB via an SD card.
Factory Reset Protection (FRP) is a security feature on Android devices running Lollipop 5.1 and higher. It is automatically activated when you set up a Google™ Account on your device. Once FRP is activated, it prevents the use of a device after a factory data reset, until you log in using a Google username.
To reset FRP on your Gionee X1 or X1S, you will need SP flash tools, a scatter file taken from the firmware of your device, and basic PC and USB knowledge. You must also backup your NVRAM, and personal data, and create a Nandroid backup.
Download
Flash File: https://www.mediafire.com/file/v7avr4eg60xvlh4/Gionee_X1_MT6737T_0201_T5288.zip/file
Frp File: https://www.mediafire.com/file/v7avr4eg60xvlh4/Gionee_X1_MT6737T_0201_T5288.zip/file
Sp Flash Tool: https://a2gsmtools.com/download-sp-flash-tool-for-windows/
Drivers: https://a2gsmtools.com/drivers/
Here’s how to reset FRP on your Gionee X1 or X1S:
Method 1:
Run SP flash tools and click “Choose” to open the scatter file.
Select the scatter file and click “Open.”
Select the format menu and mark “Manual format flash.”
Open your scatter file.
Press CTRL + F on your keyboard and type FRP.
Copy and paste the address as you see in the image.
Copy and paste the partition size.
Click “Start.”
Connect your switch phone and wait.
Your FRP reset is complete. Disconnect to switch on your phone.
If you are unable to complete the above method, follow this one:
Method 2:
Download the “DA” file for your Gionee X1 or X1S model.
Open the SP flash tool and select the “DA” file.
Load the scatter file.
Go to the “Format” tab and select “Manual Format Flash.”
Enter the “Begin Address” and “Format Length” you copied from the FRP partition in Method 1.
Click “Start” and connect your device.
Wait for the process to complete.
Disconnect your device and power it on.
That’s it! Your Gionee X1 or X1S FRP reset should be successful.